| WHAT YOU NEED |
Soap Base / Soap Mould / Soap Scent / Cucumber & Mint Scrub / Microwavable jug
| HOW YOU MAKE IT |
The process is really simple and you can fully customise your soap from start to finish. Start with your soap base - there are a whole range to choose from. To give myself a few future options, I opted for a transparent base. Cut the base into squares of around 3cm [I found 3 of these filled one of my moulds, but the mould should let you know the water it can contain to help guide.
Transfer into a microwaveable jug and heat in 20 second bursts until melted:scrub DIY I posted a few weeks ago, so used this to fill my moulds. The transparent base would show the scrub floating [in theory!]:
Leave the soap to set [this takes only around 15 minutes - quicker if you pop in the fridge] before removing easily from the moulds [make sure silicon is used]: